Results - Agilent Technologies E4404B Operation Manual

Making GSM Base Station Measurements
Making The Power Steps Measurement
• Measurement setup parameters.
Parameters that exist under the
NOTE
to be changed. Any changes from the default values may result in
invalid measurement data.

Results

An example screen from a Power Steps measurement is shown below in
Figure 3-11
Figure 3-11 Power Steps Measurement
3-18
These are measurement specific parameters changed using the
Measurement setup (
to default settings at any time by pressing
. For further information on measurement setup
Meas Defaults
parameters, refer to the ESA-E Series Spectrum Analyzers GSM
Measurement Personality User's Guide.
) menu. Parameters can be returned
Meas Setup
Meas Setup Advanced
and
Meas Setup Restore
key seldom need
Chapter 3