Yamaha DTXT2S Service Manual page 47

[Indication of judgment result]
None
[Content of FAIL judgment]
None
[Completing the test]
Pressing the [ENTER/ YES] key proceeds to the next
test.
C- 115. 64ch OUT
[Initial indication]
115 64ch OUT
[Test content]
Check that 64 sound channel is producing sounds
correctly with 1 ~ 32ch producing sounds from
OUTPUT (L/MONO) and 33 ~ 64ch producing sounds
from OUTPUT (R).
[Test method]
If the [ENTER/ YES] key is pressed, the LCD indicates
Sounding for approx. 0.3 seconds and Silent for
approx. 0.1 second. This is repeated 32 times. Set the
MAIN OUT volume to MAX.
115 64ch OUT
Lch=XX Rch=XX
XX: Number of the channel currently producing sounds
[Check item]
Check by auditory sense that 64 sound is produced
correctly. Also check that the output wave is a correct
since wave. (Lch = 1 kHz, Rch = 700 Hz)
[Indication of judgment result]
None
[Content of FAIL judgment]
None
[Completing the test]
OK: The test will proceed to the next on automatically.
C- 116. FACTORY SET
[Initial indication]
116 FACTORY SET
[Test content]
Initialize the data to the factory settings.
[Test method]
Pressing the [ENTER/ YES] key provides factory
setting with [END] being displayed.
[Check item]
None
[Indication of judgment result]
None
[Content of FAIL judgment]
None
[Completing the test]
None
Others. Version Check
You can check the ROM version if you turn on power while
holding down the "SHIFT" key.
DTXTREME IIS
47