Yamaha DTXT2S Service Manual page 33

[DIAG 2] LCD indication
MIN_1R =127- 69 =58 (3a)
MAX_1R =127- 49 =78 (4e)
MIN_CR =23 (17)
MAX_CR =38 (26)
[DIAG 3] LCD indication
MIN_BRS =17 (11)
MAX_BRS =27 (1b)
MIN_AUX =70 (46)
MAX_AUX =92 (5c)
[DIAG 4] LCD indication
RIMATT =31 (1f)
BRSATT =65 (41)
OUTATT =31 (1f)
AUXATT =38 (26)
* Note: The figure is a default one with the value in the parentheses ( ) represented by HEX.
ATT sw
L position
OFF (Open)
Press the [ENTER/ YES] key after setting each parameter. The following appears.
[DIAG 2] MIN_1R MAX_1R
58
Upper limit in the OK range of INPUT1 RIM (value by subtraction from 127 due to reverse polarity)
Lower limit in the OK range of INPUT1 RIM (value by subtraction from 127 due to reverse polarity)
Lower limit in the OK range after time elapse in the time constant inspection in case ATT sw = ON at INPUT1~16
Upper limit in the OK range after time elapse in the time constant inspection in case ATT sw = ON at INPUT1~16
[DIAG 3] MIN_BRS MAX_BRS
17
Disregard
Disregard
Lower limit in the OK range in AUX IN PEAK
Upper limit in the OK range in AUX IN PEAK
[DIAG 4] RIMATT BRSATT
31
Attenuation level of sine wave output when INPUT2-5 RIM is checked (Variance: +/-0.75 dB)
Disregard
Attenuation level of sine wave output when INPUT1-16 is checked for input (Variance: +/-0.75 dB)
Attenuation level of sine wave output when AUX IN PEAK is checked (Variance: +/-0.75 dB)
H position
ON (Short)
1 MAIN ROM
MIN_CR MAX_CR
78 23
MIN_AUX MAX_AUX
27 70
OUTATT AUXATT
65 31
DTXTREME IIS
38
92
38
33