Yamaha DTXT2S Service Manual page 42

DTXTREME IIS
C- 36. ROTARY ENCODER 1
C- 37. ROTARY ENCODER 2
C- 38. ROTARY ENCODER 3
C- 39. ROTARY ENCODER 4
C- 40. ROTARY ENCODER 5
[Initial indication]
36 ROTARY ENCODER 1
[Test content]
Check that the rotary encoder rotates clockwise and
counter-clockwise correctly in order from the left
(EC701) to the right end (EC705).
[Test method]
Rotate the encoder clockwise and then counter-clockwise
according to the LCD indication.
Clockwise rotation
36 ROTARY ENCODER 1
rotate right
Counter-clockwise rotation
36 ROTARY ENCODER 1
rotate left
[Check item]
Check LCD test results.
[Indication of judgment result]
In case of OK (Go next.)
37 ROTARY ENCODER 2
rotate right
The above is displayed. Likewise, rotate the 2nd, 3rd,
4th, and 5th encoder in order.
In case of NG
37 ROTARY ENCODER 1
FAIL rotate right(left)
[Content of FAIL judgment]
FAIL is displayed on the LCD as above and no further
process will occur even if the encoder is rotated in the
direction indicated by the LCD.
[Completing the test]
OK: The test will proceed to the next one automatically.
C- 41. RIM SW IN 1
C- 42. RIM SW L IN 1
C- 43. RIM SW IN 2
C- 44. RIM SW L IN 2
C- 45. RIM SW IN 3
C- 46. RIM SW L IN 3
C- 47. RIM SW IN 4
C- 48. RIM SW L IN 4
C- 49. RIM SW IN 5
C- 50. RIM SW L IN 5
C- 51. RIM SW IN 6
42
C- 52. RIM SW L IN 6
C- 53. RIM SW IN 7
C- 54. RIM SW L IN 7
C- 55. RIM SW IN 8
C- 56. RIM SW L IN 8
[Initial indication]
41 RIM SW IN 1
waiting
[Test content]
Connect the 3 zone pad (TP65S etc.) fitted with rim
switches to each input from IN1 (SNARE) to IN8 (H.HAT)
and check for correct operation.
[Test method]
Connect the 3 zone pad fitted with rim switches to each
input jack in order from INPUT1 to 8 and press the rim
switch which is not on the 3 zone side. In case of OK, the
next display will appear.
42 RIM SW L IN 1
waiting
Press the switch on the 3 zone side. In case of OK, put in
IN2 (TOM1), press the switches which is not a 3 zone one,
and then press the 3 zone switch. Repeat this step in order
up to IN8 (H. HAT)
[Check item]
Check LCD test results.
[Indication of judgment result]
In case of OK.
42 RIM SW L IN 1
waiting
In case of NG
41 RIM SW IN 1
FAIL
[Content of FAIL judgment]
FAIL is displayed on the LCD as above and no further
stepwill take place.
[Completing the test]
OK: The test will proceed to the next one automatically.
NG: For handling the FAIL judgment,
see "B. CARRYING ON THE TEST".
C- 57. NOT AVAILABLE skip this step
* This test is not performed.