Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
second-mpls-exp-value: Specifies an EXP value for the second MPLS label, in the range of 0 to 7.
Examples
# Define a traffic behavior to mark packets with EXP value 3 for the second MPLS label.
<Sysname> system-view
[Sysname] traffic behavior b1
[Sysname-behavior-b1] remark second-mpls-exp 3
Modified feature: Automatic configuration
Feature change description
In this release, you can set the maximum retry attempts for automatic configuration. The device will
retry obtaining the settings until the retry attempts reach the limit. If you set the maximum retry
attempts to 0, the device does not perform a retry when encountering an automatic configuration
failure.
Removed feature: Tinyproxy
Feature change description
Support for the tinyproxy feature was removed.
Removed command
http-proxy
Syntax
http-proxy
undo http-proxy
Views
System view
27