Setting The Date Format; Setting The Language - Epson R-D1 User Manual

Resetting the default settings 1. Make sure that the camera is off, and then open the battery cover
as shown below.
If necessary, you can use this function to initialize all current settings
to their factory defaults, as shown below.
Setting
Color
Film
Date
Power Save Timer
Sequential Numbering
LCD Brightness
2. Insert the battery.
Language
Insert the battery into the camera until it clicks, making sure the
USER Button orientation of the battery is correct.
Follow the steps below to restore the default settings.
1. Use the JOG dial to select Initialize Settings in the Camera Settings
menu, and press the ENTER button. The Initialize Settings screen is
displayed. For details on using the menu, see "Camera Settings
menu" on page 41.
2. Press the ENTER button to select OK. Camera Settings are initialized,
and the screen returns to the Camera Settings menu.
3. Close the battery cover.
Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals
Default
Color
Standard
DUMMY
YYYY/MM/DD
5 min.
On
5/8
English
Delete
DUMMY
Note:
Releasing the Shutter
To check the battery's remaining charge, see "Remaining battery power"
on page 23.
Full and half-release
If you find that your battery has run out soon after recharging it a number
of times, make sure to discharge it completely before recharging it. Or, the
The shutter button has the following two-step function.
battery's service life has ended. In that case, replace it with a new battery.
Half-release: When you press the shutter button halfway down, the
optimal shutter speed (i.e., optimal exposure value) is
Installing and Removing a Memory Card
displayed in the viewfinder. Also, pressing the
shutter button halfway down in playback mode or
You cannot take photos unless an SD memory card is installed in your
Power Save Timer mode returns the camera to
camera.
picture-taking mode.
c
Caution:
Full-release: Press the shutter button all the way down to take a
Make sure the memory card has no dirt or dust on the terminal. If
photo.
the terminal is dirty, you may not be able to write to or read from
the card.
Focusing
Never insert or remove a memory card while the SD card access
LED is on. Doing so may cause data in the card to be lost or
To focus on a subject such as a group of people, rotate the focus ring on
damaged.
the lens.
Avoid using or storing the card in direct sunlight, or in places that
Note:
are extremely hot, humid, or dusty.
Center your eye in the viewfinder to help you focus.
Keep the memory card slot cover closed while the memory card is
loaded. This protects the memory card and the slot from dust and
When vertical lines appear in the subject, turn the focus ring until the
static; otherwise data on the memory card may be lost or damaged.
lines merge.
Exposure of static electricity may cause the memory card to
malfunction.
Note:
To make sure you are using the memory card correctly, read the documentation
provided with the memory card. When using other devices with a memory card,
also read the documentation provided with those devices.
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1