Advertisement
Troubleshooting
Problem
The appliance does not
work
The blade unit is
blocked.
The motor unit gives off
an unpleasant smell
during the first few times
of use.
The appliance makes a
lot of noise.
Cause
The appliance is
equipped with a built-in
safety lock. If the parts
have not been properly
assembled onto the
motor unit, the appliance
does not work.
The appliance is
equipped with a thermal
cut-out. If the appliance
overheats, it
automatically cuts off the
power supply.
There is too much food
in the appliance.
Food is sticking to the
blades.
This is normal.
The blender beaker lid
and/or the stopper have
not been properly
placed.
ENGLISH
Solution
Check whether the parts
have been assembled
properly (see chapter
'Using the appliance').
Pull the plug out of the
wall socket and let the
appliance cool down for
30 minutes.Then put the
plug back into the wall
socket and switch the
appliance on again.
Switch the appliance off
and process a smaller
quantity.
Switch the appliance off
and dislodge the food
from the blades with a
spatula.
If the appliance continues
to give off this smell after
you have used it a few
times, check whether the
quantity you are
processing and the
processing time are
correct.
Make sure the lid and
the stopper are properly
placed and the sieve in
the lid is in front of the
spout of the blender
beaker.
15
Advertisement
