Fan - HP EliteDesk 800 G3 Maintenance And Service Manual

Fan

1. Prepare the computer for disassembly
2. Remove the top cover
3. Rotate the top of the fan up using the front tab (1).
4. Slide the fan toward the front of the computer (2), and then disconnect the fan cable from the system
board (3).
5. Remove the fan from the computer.
To install the fan, reverse the removal procedure.
42 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Top cover on page 21).
20).