Heat Sink - HP EliteDesk 800 G3 Maintenance And Service Manual

Heat sink

The heat sink is secured with three captive Torx screws. Be sure to loosen the screws in the order indicated on
the heat sink. A fan duct sits behind and partially on top of the heat sink.
order indicated on the heat sink.
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the fan
4. Locate the fan duct that sits behind the heat sink and over one heat sink screw.
(Preparation for disassembly on page
(Top cover on page
(Fan on page 42).
21).
20).
Heat sink 43