Rtc Battery - HP EliteDesk 800 G3 Maintenance And Service Manual

RTC battery

The battery that comes with the computer provides power to the real-time clock. When replacing the battery,
use a battery equivalent to the battery originally installed in the computer. The computer comes with a 3-volt
lithium coin cell battery.
WARNING!
burns if the battery is not handled properly. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose to temperatures higher than 60°C (140ºF).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace the battery only with the HP spare designated for this product.
CAUTION:
battery is removed or replaced, the CMOS settings will be cleared.
Static electricity can damage the electronic components of the computer or optional equipment. Before
beginning these procedures, ensure that you are discharged of static electricity by briefly touching a
grounded metal object.
NOTE: The lifetime of the lithium battery can be extended by plugging the computer into a live AC wall
socket. The lithium battery is only used when the computer is NOT connected to AC power.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable
batteries. For more information about recycling programs, go to http://www.hp.com/recycle.
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. If your model is an EliteDesk 800 G3, remove the secondary fan
models only) on page
5. Remove the hard drive cage
40 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
The computer contains an internal lithium manganese dioxide battery. There is a risk of fire and
Before replacing the battery, it is important to back up the computer CMOS settings. When the
(Top cover on page
(Hard drive on page
32).
(Drive cage on page
(Preparation for disassembly on page
21).
29).
33).
20).
(Secondary fan (EliteDesk 800 G3 65 W