Asus X99-E-10G WS User Manual page 98

CPU Current Capability [Auto]
This item provides a total power range for CPU overclocking. A higher value setting
provides higher power consumption delivery and extends the overclocking frequency
range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Configure higher values when overclocking or under a high CPU loading for extra power
support.
CPU Power Thermal Control [115]
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the overclocking potential. Use the <+> or <-> keys
to adjust the value. The values depend on the CPU installed.
DO NOT remove the thermal module. The thermal conditions should be monitored.
DRAM Current Capability(CHA, CHB/CHC, CHD) [100%]
This item adjusts the total power range for DRAM overclocking. Set a higher value
to provide a wider total power range and extends the overclocking frequency range
simultaneously.
Configuration options: [100%] [110%] [120%] [130%] [140%]
Configure higher values when overclocking or under a high CPU loading for extra power
support.
DRAM Switching Frequency(CHA, CHB/ CHC, CHD) [Auto]
This item affects the overclocking range and system stability. Set this item to [Manual]
to manually set a fixed DRAM switching frequency for an increased overclocking range
or enhanced system stability.
The following item appears only when you set the DRAM Switching Frequency(CHA, CHB/
CHC, CHD) to [Manual].
DRAM Power Phase Control (CHA, CHB/CHC, CHD) [Standard]
This item allows you to enable/disable the DRAM power phase control.
Configuration options: [Optimized] [Standard] [Extreme]
Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and its features.
3-28
Fixed DRAM-AB/CD Switching Frequency (KHz) [400]
This item allows you to set a higher frequency for an increased
overclocking range or a lower frequency for an enhanced system stability.
Use the <+> or <-> to adjust the value. The values range from 300 KHz to
550 KHz with an interval of 50 KHz.
Chapter 3: BIOS Setup