Internal Connectors - Asus X99-E-10G WS User Manual

1.2.9

Internal connectors

1. Intel X99 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34,
®
SATA6G_56, SATA6G_78, SATA6G_910)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
•
•
Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports (black) do not support
Intel
®
1-24
Rapid Storage Technology through the onboard Intel
®
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.3 PCH Storage Configuration for details.
Before creating a RAID set, refer to the manual bundled in the motherboard support
DVD.
Rapid Storage Technology and RAID configuration.
Chapter 1: Product Introduction
X99
®