Asus X99-E-10G WS User Manual page 103

DRAM SVID Support [Auto]
Set this item to [Disabled] when overclocking. Disable this item to stop the CPU from
communicating with the external voltage regulator.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Voltage(CHA, CHB) [Auto]
This item allows you to configure the voltage for the DRAM on the left. Use the <+> or <-> to
adjust the value. The values have an interval of 0.010V.
Configuration options: [Auto] [0.800] - [1.900]
DRAM Voltage(CHC, CHD) [Auto]
This item allows you to configure the voltage for the DRAM on the right. Use the <+> or <->
to adjust the value. The values have an interval of 0.010V.
Configuration options: [Auto] [0.800] - [1.900]
PCH Core Voltage [Auto]
This item allows you to configure the core voltage for the PCH(platform controller hub). Use
the <+> or <-> to adjust the value. The values have an interval of 0.00625V.
Configuration options: [Auto] [0.700] - [1.800]
PCH I/O Voltage [Auto]
This item allows you to configure the I/O voltage for the PCH(platform controller hub). Use
the <+> or <-> to adjust the value. The values have an interval of 0.00625V.
Configuration options: [Auto] [1.200] - [2.200]
VCCIO CPU 1.05V Voltage [Auto]
Use the <+> or <-> to adjust the value. The values have an interval of 0.00625V.
Configuration options: [Auto] [0.700] - [1.800]
VCCIO PCH 1.05V Voltage [Auto]
Use the <+> or <-> to adjust the value. The values have an interval of 0.00625V.
Configuration options: [Auto] [0.700] - [1.800]
VTTDDR Voltage(CHA, CHB) [Auto]
This item allows you to configure the termination voltage for the DRAM on the left. Use the
<+> or <-> to adjust the value. The values have an interval of 0.00625V.
Configuration options: [Auto] [0.20000] - [1.00000]
VTTDDR Voltage(CHC, CHD) [Auto]
This item allows you to configure the termination voltage for the DRAM on the right. Use the
<+> or <-> to adjust the value. The values have an interval of 0.00625V.
Configuration options: [Auto] [0.20000] - [1.00000]
PLL Termination Voltage [Auto]
This item allows you to configure the PLL termination voltage. Use the <+> or <-> to adjust
the value. The values have an interval of 0.006602V.
Configuration options: [Auto] [0.200000] - [1.797684]
ASUS X99-E-10G WS
3-33