Network Stack - Supermicro C7Z170-OCE User Manual

Supermicro C7Z170-OCE Motherboard User's Manual
PCIe/PCI/PnP Configuration
PCH SLOT1 PCI-E 3.0 X1 (IN X4) OPROM,
CPU SLOT2 PCI-E 3.0 X16 OPROM,
PCH SLOT3 PCI-E 3.0 X1 (IN X4) OPROM,
CPU SLOT4 PCI-E 3.0 X8 (IN X16) OPROM,
CPU SLOT5 PCI-E 3.0 X16 OPROM,
Select Disabled to deactivate the selected slot, Legacy to activate the
slot in legacy mode and EFI to activate the slot in EFI mode. The options
are Disabled, Legacy and EFI.
Onboard LAN Option ROM Type
Select the onboard LAN option ROM type. The options are Legacy and
EFI.
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer us-
ing a PXE device installed in a LAN port specified. Select Disabled to
prevent system boot using a device installed in a LAN port. The options
are Disabled and PXE.
Onboard LAN2 Option ROM Type
Select PXE (Preboot Execution Environment) to boot the computer us-
ing a PXE device installed in a LAN port specified. Select Disabled to
prevent system boot using a device installed in a LAN port. The options
are Disabled and PXE.

Network Stack

Select Enabled to enable PXE (Preboot Execution Environment) or UEFI
(Unified Extensible Firmware Interface) for network stack support. The
options are Disabled and Enabled.
Ipv4 PXE Support (Available when Network Stack is set to
Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv4 PXE boot option will
not be supported. The options are Enabled and Disabled.
Ipv6 PXE Support (Available when Network Stack is set to
Enabled)
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv6 PXE boot option will
not be supported. The options are Enabled and Disabled.
4-26