Location And Function Of Parts; Front Panel - Sony BKM-17R Operating Instructions Manual

Location and Function of Parts

For functions available with your monitor, see page 7.

Front Panel

 OPERATE lamp
The lamp lights when the unit is turned on.

(USB connector)
You can use a USB memory stick (sold separately) to save
and load monitor setup and adjustment data.
For inserting/ejecting the USB memory stick, see
"Handling a USB memory stick" (page 13).
 CAPTURE button
Press to capture the 3G/HD-SDI input signal as the still
picture in frame.
 Function buttons
Press to change the operation conditions for the
monitor.
Each time the button is pressed, the LED on the button
turns on and turns off, and the operation conditions are
changed. (The LED may not turn on depending on the
function.)
You can assign other functions to the F1 to F16 buttons.
Note
The button may not function due to the input signal. For
the limitations with each type of signal, refer to the
manual of your monitor.
Factory preset setting
BLUE ONLY button CHROMA UP button
MONO button
APERTURE button
STATUS button
FLICKER FREE
button
NATIVE SCAN button
INTERLACE button
MARKER button
SIDE BY SIDE button
STATUS button: Press to display the current status of
the monitor.
APERTURE button: Press to modify the frequency
response.
PIXEL ZOOM button
CHAR OFF button
COLOR TEMP
button
CAPTURE LOAD
button
TIME CODE button
ALM button
9
Location and Function of Parts