Sony BKM-17R Operating Instructions Manual page 10

The degree of modification is set in the menu of the
monitor.
MONO button: Press to display a monochrome
picture.
When the button is set to off, the monitor switches
automatically between color and monochrome mode,
depending on the color discrimination of the input
adaptor.
BLUE ONLY button: Press to cut red and green
signals and display only the blue signal as a
monochrome picture. This function is useful for
adjusting chroma and phase, and for checking signal
noise.
CHROMA UP button: Press to increase the chroma
setting by 12 dB.
PIXEL ZOOM button: Press to enlarge part of the
image up to 8 times using the pixel zoom function.
CHAR OFF button: Press to hide the characters from
the monitor during manual adjustment.
COLOR TEMP button: Press to display the Manual
Adjust menu of the color temperature on the monitor.
FLICKER FREE button: Press to change the flicker
free setting.
NATIVE SCAN button: Press to display the picture in
native scan mode.
INTERLACE button: Press to display interlaced
picture.
MARKER button: Press to display all markers on the
screen.
The marker display mode is set in the menu of the
monitor.
SIDE BY SIDE button: Press to display the picture in
side-by-side format.
ALM button: Press to display the audio level meter.
TIME CODE button: Press to display the time code.
CAPTURE LOAD button: Press to display the menu
for loading captured images from the USB memory
stick.
10
Location and Function of Parts
 Menu operation buttons
MENU button:
Displays the monitor menu.
Press again to clear the menu in the
main menu. Each time the button is
pressed in other menu, the menu
returns to the upper level.
UP/DOWN buttons:
Move the cursor upward or
downward. In setting mode, the
setting or adjustment value is
increased by pressing UP and
decreased by pressing DOWN.
ENTER button:
Changes the item. In setting mode,
confirms the adjustment or setting
value. (Ent button on the numeric
keypad has the same function.)
 MONITOR
switch
Each time the switch is pressed, the monitor is turned on
or set in sleep mode. When several monitors are
connected to the unit, it is possible to turn on the power
of the specified monitors only, or of all monitors at the
same time or to set in sleep mode by setting with the
monitor selection button.
 Numeric keypad
Use to designate the channel number for the input signal
to be monitored, or to enter the setting values with the
menus.
Channel number entry method
When selecting a one-digit number, press the button
of the channel number.
When selecting a two-digit number, first press the 0
button, then press a two-digit channel number.
Del button:
Deletes the entered values
and characters one by one.
Numeric buttons
Ent button:
Changes the item. In
setting mode, confirms
the adjustment or setting
value. (ENTER button of
the menu operation
buttons has the same
function.)