Embroidery
> Touch the icon «Embroidering».
> Touch the icon «Relocating the hoop».
> Turn the «Upper Multifunctional knob» to move the hoop horizontally.
> Turn the «Lower Multifunctional knob» to move the hoop vertically.
Repositioning the needle
When the thread breaks, the needle can be repositioned in the embroidery motif by means of the
embroidery sequence control.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Embroidery sequence control when thread breaks».
> Select the desired position in the compact view using the touchscreen pen or the finger.
> Turn the «Upper Multifunctional knob» to move the hoop stitch by stitch.
> Turn the «Lower Multifunctional knob» to move the hoop in large steps.
> Touch the icon «0–9» to select the desired stitch by entry.
Cutting connecting stitches
The function is activated by default and the connecting stitches are cut automatically. When the function is
deactivated, the connecting stitches between the embroidery motifs must be cut manually.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the yellow-framed icon «Cutting the connecting stitches» to deactivate the function.
Reducing color changes
When the embroidery motifs overlap, the color changes cannot be reduced.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Reducing color changes».
Embroidering motifs in one color
> Select an embroidery motif.
> Touch the icon «Embroidering».
166
– In the left portion of the display a compact view of the embroidery motif is displayed. On the right side
the enlarged embroidery motif is displayed.
–
Identical colors of the embroidery motif are collected to one color.
035964.50.04_2014-08_Manual_B790_EN