Tapering; Overview Tapering; Altering Points Of A Stitch Pattern - Bernina 790 Manual

6.4 Tapering

Overview Tapering

1 Programming length
2 Pattern repeat
3 Adjusting the length
4 Mirror image left/right
5 Balance

Altering points of a stitch pattern

Tapering is a technique in which the stitch patterns come to a point at the beginning and the end. Four
different points are pre-programmed. In addition to that, the points of stitch patterns can also be determined
manually.
> Touch the icon «Decorative stitches».
> Select a stitch pattern of the Category 1400.
> Touch the icon «i»-Dialog.
> Touch the icon «Selecting type of tapering».
> Select the desired point of the stitch pattern in the right portion of the display.
035964.50.04_2014-08_Manual_B790_EN
1 2
3 4
5
6 7
8 9 10
6 Determining the length manually
7 Selecting kind of tapering
8 Backstepping
9 Saving stitch pattern settings
10 Back to basic setting
Decorative stitches
113