Hard Of Hearing Accessibility Features - Cisco DX650 User Manual

Accessibility Features

Hard of Hearing Accessibility Features

Accessibility features for the hard of hearing are supported on the Cisco DX650.
Accessibility feature
Visual Message Waiting Indicator
(handset)
Visual notification of phone state
Inline amplifier support (handset)
Description
Viewable from 360 degrees, this
visual indicator also provides an
Audible Message Waiting Indicator
(AMWI). Users change the voice
message light on their handset and
the audible voice message indicator
on their phone by logging in to
their Cisco Unified
Communications Self Care Portal
and accessing the message
indicator settings. Users change the
setting to on or off.
For visual notification of the phone
state:
• Toggle the Mute and
Speaker buttons on and off
to indicate the state of the
phone.
• Use the Mute button to
toggle the microphone on or
off. When the microphone is
muted, the button is lit.
• Use the Speaker button to
toggle the speakerphone on
or off. When the
speakerphone is on, the
button is lit.
Handsets support third-party inline
amplifiers, which users attach to
the handset and cord and sit
between the handset and the phone.
Phones support the following
third-party inline amplifiers:
• Clarity HA-40 Inline
Amplifier for Corded Phone
• Plantronics EHA40 Inline
Amplifier
Cisco DX650 User Guide, Release 10.2(2)
Hard of Hearing Accessibility Features
Setup requirements
Standard on all phones; users and
system administrators can make
changes.
Standard on all phones; no set up
is required.
Standard on all phones; no set up
is required.
25