Disassemble Engine Module - Eiki EK-600U Service Manual

2-10 Disassemble Engine
Module
1. Unplug interrupter switch cable from
LVPS board (as yellow square),
unscrew 2 screws (as red circles).
2. Remove interrupter switch holder to
seperate interrupter switch.
3. Unscrew 5 screws (as green circles).
4. Unplug thermal cable from LVPS board
to disassemble engine module
(as yellow square).
Interrupter switch
EK-600U/EK-601W 2-11