Network Setting - Eiki EK-600U Service Manual
Up to 1920x1200 resolution
Hide thumbs
Also See for EK-600U:
- Owner's manual (83 pages) ,
- Quick start manual (2 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
5-2-2 Network Setting
1. Double click the "Local area connection",
choose "Properties".
2. Select "Internet protocol (TCP/IP)", then
click "Properties".
3. Modify the IP address to 192.168.0.101,
and modify Subnet mask to 255.255.255.0.
Note: - The IP address (192.168.0.XXX) of PC
IP address must be different from the
projector IP address written down in
5-3-3.
4. Click "OK".
5. Click "Close" to quit the setting screen.
EK-600U/EK-601W
5-7
Advertisement
Table of Contents
Troubleshooting
