Daikin R410A Technical Manual page 21

Intake Grille
Intake grille must be installed as step below.
1. Hook the air intake grille on the groove on the unit's bottom frame in order of (1) -> (2).
(Refer to Figure J).
2. Fit the grille stopper (front panel) into the groove on the air intake grille and lock the grille down in its
original place by screw. (Refer to Figure K).
If the unit needs to be service, steps below shall be followed:
1. Con rm that the unit had been switched off before servicing the unit.
2. Use screwdriver to unlock the screw on the intake grille.
3. Install the intake grille and screw the grille stopper after service and make sure the unit is proper
install.
19
M4 x 12 Screw
Front Panel
Figure J
Grille stopper
Intake grille
Figure K