< Method 2 >
Fix the indoor unit to the floor with Anchor bolts (to be locally procured) using fixing holes (x4) on the
bottom frame.
Fixing Hole (x 4)
For more safety precaution, fix the indoor unit with < Method 1 > and < Method 2 > during installation.
Piping and Drain Hose Installation.
• Detach the pipe retainer,
<In case of left or right piping>
1. Open the holes on the Right (Left) side panel. (Refer to Figure F).
2. Pass refrigerant pipes, drain pipes, and unit wiring through the hole on the side panel.
Bottom frame
* Dimension in ( ) for 40-60 models.
Bottom frame
Through hole (left and right side panel, rear panel)
Through hole for wiring (left and right side panel)
Side Panel
All dimensions are in mm
260
57, (79)
144, (202)
<Bottom>
Figure E
Figure F
16