Rechargeable Battery (Optional Accessory); Installing The Rechargeable Battery; Rechargeable Battery Status Indication; Updates - Safescan 6185 User Manual

08. RECHARGEABLE BATTERY (OPTIONAL ACCESSORY)

8.1 INSTALLING THE RECHARGEABLE BATTERY

1.
Disconnect the power adapter.
2.
Remove the money platform from the scale.
3.
Turn the device upside down and open the battery lid (see chapter 3.1).
4.
Place the battery in the battery compartment, connect the wire and close the lid.
5.
Install the money platform.
6.
Connect the power adapter to charge the battery.

8.2 RECHARGEABLE BATTERY STATUS INDICATION

- At start up: Inner segments are blinking for 5 seconds -> Battery is being charged
- At start up: All segments are blinking for 5 seconds after this the battery icon remains on -> Battery is 100% charged
Device is powered by the battery only:
- Full battery is on -> Battery power is 100%
- Half the battery is on -> Battery power more than 50%
- Half the battery is blinking continuously -> Battery power less than 20%
- Empty battery is continuously blinking -> Battery is empty (battery power less than 5%) In the screen the message Battery Low is blinking,
connect the power adapter to recharge the battery.
NOTE: BATTERY LIFE MAY DETERIORATE AFTER MANY LOAD CYCLES – THIS IS COMMON WHEN USING RECHARGEABLE
BATTERIES

09. UPDATES

For more information about device and currency updates see www.safescan.com for details.
www.safescan.com
33