5.6 SET DEVICE
The Set region function should only be used when the 6185 is moved to a country in a different region.
5.6.1 SET REGION
The Set region function should only be used when the 6185 is moved to a country in a different region.
1
Press
and select 'set device' with
the
buttons.
4
Select the desired region with the
buttons. Press
confirm.
5.6.2 CALIBRATE THE WEIGHING SYSTEM
The Safescan 6185 has a continuous automatic calibration system, whereby calibration by the user should not be required. However, it is
possible to re-calibrate the 6185 should this be necessary.
1
Press
and select 'set device' with
the
buttons.
3
Press
to confirm. The display will show "taring" and afterwards asks to place a 500 gram weight on the platform.
4
Place a 500 gr weight on the platform.
The display will show "sampling" while
the 6185 is being calibrated.
7
Remove the 500 gr weight from the
platform.
2
Press
to confirm. "set region" is
shown on the display.
5
The 6185 will go back to counting
mode.
to
2
Press
to confirm. Select "set cal"
with the
5
The 6185 will switch to weighing scale
mode, showing the current weight on
the platform.
8
The Safescan 6185 will go back to
counting mode
www.safescan.com
3
buttons..
6
Press
to confirm. The device will
show the current regional setting.
The display will show "finished" to
indicate that the calibration procedure
has ended
23