F+1: Add A Reference Number To A Count; F+2: Save Count Results - Safescan 6185 User Manual

6.2 + : ADD A REFERENCE NUMBER TO A COUNT
A reference number of max. 3 digits can be added to a count. This reference number can be used to link the count results to a specific user, a
specific cash drawer, a check out or any other reference. A reference number can be added at any moment before, during or after a count.
Using reference numbers may be useful when more than one cash drawer has to be counted.
1
Press followed by
button 1).
4
If you have previously entered a
reference number, this number will be
shown when you have pressed
+ . Press to re-use this
reference number, press
the reference number or enter a new
number with the numeric keys and
press to confirm and return to the
count menu.
NOTE: TO CLEAR THE REFERENCE NUMBER, PRESS
6.3 + : SAVE COUNT RESULTS
1
After finishing your count, you can
save the count result by pressing
followed by (numeric button 2).
4
If no count is active, the 6185 will give
a message "no count" when pressing
+
2
Enter a reference number of maximum 3
(numeric
digits with the numeric keys. Press
to confirm.
to clear
2
The 6185 stores the results in its me-
mory and shows the memory position
in which the results have been saved
(example: M16).
FOLLOWED BY
www.safescan.com
3
The reference number is shown for 3
seconds. The 6185 will sound a 'beep'
and will return to the count menu.
3
After appr. 2 seconds the device will
return to count mode.
25