Back To Default Settings; Clear All Counts - Safescan 6185 User Manual

5.4 BACK TO DEFAULT SETTINGS

This function resets the 6185 back to its default factory settings. All user-calibrated counting items will be deleted.
1
Press and select 'default' with the
buttons.
4
The 6185 will restart in first-time use
mode. See chapter 1 and 2 on how to
set up your 6185.

5.5 CLEAR ALL COUNTS

This function clears alll count data in the memory. The user-calibrated counting items will not be deleted.
1
Press and select 'Clear all counts'
with the buttons.
4
The 6185 will go back to counting
mode.
22
2
Press to confirm. The display will
show "RESET ALL".
2
Press to confirm. "Clear all" will
start blinking.
www.safescan.com
3
Press to confirm. The device will
delete all data and user-calibrated items
and go back to factory settings. You will
see a counter running back to zero on
the right bottom side of the display.
3
Press to confirm. The device will
clear all data. The display will show
"Cleared" when finished.