4.3.1 VIEW SAVED COUNT RESULTS
1
Press
followed by
button • ).
4
Press
to open the selected count result. Use the
the count details (Currency, Reference (if any), Bank value (if any), count results per item
and denomination)
Press
to return to switching between the stored counting results. Press
4.3.2 CLEAR COUNT RESULTS
If the memory is full (message: "ERR / MAX" will show in the display instead of the memory position number) it is not possible to store new
counts. To free up memory space you can clear the counting results from the memory in one go. When required you can first print the counting
results or transfer the counting result to the Safescan PC software.
NOTE: CLEARING THE COUNTING RESULTS IS IRREVERSIBLE. IT IS NOT POSSIBLE TO RECOVER THEM ON THE DEVICE.
1
Press
to enter the settings menu.
2
The saved results are shown on the
(numeric
screen, starting with the last saved
counting total. Also the time and date
when this last counting result has been
saved are shown. The counting result's
memory position is blinking (example:
M16).
2
Nagivate with the
the "clear all" menu and press
Clear All starts blinking in the screen.
buttons to scroll through
to return to the count menu.
buttons to
.
www.safescan.com
3
Press the
buttons to switch
between the saved counting results.
3
Press
to clear all counting results.
When finished the display will show
"CLEARED"
13