Preparing The Lancing Device - Bayer HealthCare CONTOUR NEXT User Manual

Preparing the Lancing Device

The lancing device graphics are for illustration purposes
only. Your lancing device may look different. Refer to
your lancing device insert for detailed instructions on
preparing the lancing device.
For Alternative Site Testing instructions, see page 16.
WARNING: Potential Biohazard
The lancing device provided by Bayer is intended for
single patient use only. The lancing device should
not be used for assisted blood draws by health
care providers or at health care provision sites, and
should never be shared with anyone else, even a
family member, due to risk of infection. Use a new
lancet each time you test because it is no longer
sterile after use.
1. Remove the endcap
from the lancing device.
Hold the endcap dial
and gently snap off
the endcap from top
to bottom.
2. Loosen the round
protective cap on a
lancet by rotating it
¼ turn, but do not
remove it.
7