Bayer HealthCare CONTOUR NEXT User Manual page 25

Apply More Blood
to continue testing.
(E01)
Too Little Blood
Remove used strip.
Repeat test with new
strip.
9. If you have the AutoLog feature turned on, the AutoLog
screen appears. Your test result will not display until you
make a selection. Select Fasting, Before Meal, After Meal,
or No Mark by pressing the OK button when the selection
is highlighted.
CAUTION: If your result is above or below your set
Target ranges, you will always see your result without
pushing a button.
Please see Test Results with AutoLog On, page 13, or Test
Results with AutoLog Off, page 15.
If the first blood drop is not enough,
the meter will beep twice and display
"Apply More Blood to continue testing."
You have about 30 seconds to apply
more blood onto the same strip.
If you do not re-apply enough blood
within about 30 seconds, you will see
a screen telling you to remove the strip
and start with a new strip.
19