Water Drainage - Arctic King WPPH-06CR5 Instruction Manual

AUTO-RESTART
If the unit breaks off unexpectedly due to the power cut,it will restart with the previous function
setting automatically when the power resumes.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, it can not be restarted operation in the first 3 minutes. This is to
protect the unit. Operation will automatically start after 3 minutes.
AIR FLOW DIRECTION ADJUSTMENT
Adjust the air flow direction manually:
-The louver can be set to the desired position manually.
-Do not place any heavy objects or other loads on the louver, doing so will cause damage to
the unit.
-Ensure the louver is fully opened under heating operation.
-Keep the louver fully opened during operation.

Water drainage

-During dehumidifying modes, remove the drain plug from the back of the unit, install the drain
connector(5/8" universal female mender) with 3/4" hose(locally purchased). For the models
without drain connector, just attach the drain hose to the hole. Place the open end of the hose
directly over the drain area in your basement floor.
NOTE:When the continuous drain hose is not used, ensure that the drain plug and
knob are installed firmly to prevent leakage.
Remove the
drain plug
-When the water level of the bottom tray
reaches a predetermined level, the unit beeps 8 times, the
digital display area shows "P1" . At this time the air
conditioning/dehumidification process will immediately stop.
However, the fan motor will continue to operate(this is normal).
Carefully move the unit to a drain location, remove the bottom
drain plug and let the water drain away. Reinstall the bottom
drain plug and restart the machine until the "P1" symbol
disappears. If the error repeats, call for service.
NOTE: Be sure to reinstall the bottom drain plug firmly to
prevent leakage before using the unit.
Operation
Continuous
drain hose
Bottom drain
plug