Treadbelt Alignment; Figure 10.8. Close Up Of Motor, Showing Front Roller; Figure 10.9. Back Of Treadmill Shown For Tensioning Bolt Location; Figure 10.10. Hex Bolts Shown To Adjust Belt Left Or Right - biodex GAIT TRAINER 3 Application/Operation Manual

Figure 10.8. Close up of motor, showing front roller.

Figure 10.9. Back of Treadmill shown for tensioning bolt location.

Treadbelt Alignment

Figure 10.10. Hex bolts shown to adjust belt left or right.

GAIT TRAINER 3 (v3.X SOFTWARE)
4. Front roller
5. Adjust the two belt tensioning bolts
evenly at the back of the treadmill
so that the front roller slows down,
but continues to turn when you
stop the treadbelt with your foot.
6. Adjust the two hex bolts so that the
distance between the end of the roller
and the edges of the belt are equal on
both sides.
7. Turn the right hex bolt half turn
clockwise to move the belt toward the
left side of the roller.
8. Turn the left hex bolt half turn
clockwise to move the belt toward the
right side of the roller.
99