Test Results; Test Results Parameters; Figure 4.1. The Test Results Screen. Note The Test Results Functions Available At The Bottom Of - biodex GAIT TRAINER 3 Application/Operation Manual

4. Test Results

Exercise results can be reviewed on the Test Results screen. This screen appears after touching
<Results> on the Gait Training screen.
Figure 4.1.

Test Results Parameters

Time: This displays the total elapsed time from the start of the exercise session until either the
end of the session or when the <STOP> icon is pushed.
Steps: Total Steps during the exercise session.
Average Speed: Average speed of the treadbelt during exercise session.
Distance: This is the total distance traveled by the treadbelt, which is in essence the distance
traveled by the patient.
Average Walking Speed: Normative values have been established and are dependent on age and
sex. The norms are expressed next to the real time value.
Average Step Cycle: This is calculated by taking an average for the step cycles during the
exercise.
Average Step Length: This number is calculated by taking an average for all of the step lengths.
Coefficient of Variation: This is calculated as the amount of variation occurring between
footfalls.
Time on Each Foot: This is the actual time spent on the mentioned limb. The time spent on
each limb should be equally distributed between right and left. Should they be different, the
patient is spending more time on one leg than the other.
34
The Test Results screen. Note the Test Results functions available at the
bottom of the screen.
Biodex Medical Systems, Inc. © 2017