Initial Setup And Activation; Figure 1.6. Do Not Unplug The Device Or Turn Off The Controller Tray Circuit Breaker Front Base Switch Before Powering Down The Display; Figure 1.7. Footfall Initialization Screen - biodex GAIT TRAINER 3 Application/Operation Manual

Figure 1.6.

Initial Setup and Activation

When the system is first powered on, the following screen is displayed if someone is standing
on the treadmill deck:
Figure 1.7.
Note: It is important to not be standing on the treadmill deck when OK is selected to perform
the footfall initialization. The footfall initialization calibrates the treadmill sensors to patient
footfalls. Standing on the treadmill deck while the initialization is in process, will result in
inaccurate footfall readings.
GAIT TRAINER 3 (v3.X SOFTWARE)
Do not unplug the device or turn off the controller tray circuit breaker
front base switch before powering down the display.
Footfall Initialization Screen
19