Figure 8.5. Screen Configuration Screen; Figure 8.6. Set The System Date/Time Screen - biodex GAIT TRAINER 3 Application/Operation Manual

Figure 8.5.
Set Date/Time: Touch <Set Date/Time> to change the system time, date, or time zone. Touch
the button to highlight the value to change and use the <!> and <"> icons to increase or
decrease the value as desired. To change the Time Zone, touch the drop-down menu once and
scroll through the list to make a selection. Touch <OK> to save the changes and return to the
Configuration screen.
Figure 8.6.
Tone Volume: Touch any section of the horizontal bar to select a new tone volume setting.
Selecting low numbers along the bar will result in lower volume while selecting high numbers
makes the louder. Tone volume settings range from 0 to 10.
Change Access ID Code: Users can change the default Access Code (159) used to access secure
settings in the device software. To change the access ID code, select a new Access ID Code by
pressing this button and entering the value using the <!> and <"> arrows or the numeric
buttons on the key pad. Press <OK> to save the New Access ID Code and return to the System
Configuration screen.
GAIT TRAINER 3 (v3.X SOFTWARE)
Screen Configuration Screen
Set the System Date/Time Screen
63