The Hob Timer (Switching A Zone Off); Electronic Circuit's Temperature Sensor - Smeg KF24.1 User Manual

o Turn on the hob using the ON/OFF button (1) and then press the
timer button (7). The timer display (8) will show "00". Use the
timer button (7) to adjust the countdown time shown on the
timer display (8).
o Once the timer button (7) is released, the countdown will start
immediately. An acoustic signal will sound at the end of the
countdown time that you have set.
o IMPORTANT: If you have a cooking zone or zones switched on,
they will not switch off at the end of the countdown time.

The hob timer (switching a zone off)

o Turn on the hob using the ON/OFF button (1).
o Press the zone selection button (2) of the cooking zone that you
want the timer to be linked to. Then set the power level that you
want the cooking zone to operate at.
o Press the timer button (7) and the timer display (8) will show
"00". Use the timer button (7) and minus button (4) to adjust
the countdown time shown on the timer display (8).
o The relevant timer zone neon (9) will start to blink. To confirm
which cooking zone the timer has been linked to, press the
relevant zone selection button (2) again.
o The countdown will start immediately. An acoustic signal will
sound at the end of the countdown time that you have set. The
zone that has been linked to timer will switch off.
o IMPORTANT: If you have any other cooking zone switched on,
this will not switch off at the end of the countdown time.

Electronic circuit's temperature sensor

There is a temperature sensor situated inside of the hob top's cooling
unit that constantly measures the temperature of the electronic circuits
that are contained in the hob.
o In the event of the electronic circuits overheating, this will be
noted by the temperature sensor.
23