Table of Contents
Advertisement
Operation
Suitable for induction cooking
Operating the buttons
The controls described here expect the pressing of a (selection) button to be
followed by the pressing of a subsequent button.
The next button will need to be pressed within 10 seconds, otherwise the
selection will be deleted.
The plus/minus buttons can be touched individually or be permanently
pressed.
Switching on the hob and cooking zones
1. Press the on/off button
short signal will sound. The controls are ready for operation.
2. Immediately use the plus button
cooking level. The plus button will activate power setting 1 and the minus
button power setting 12.
3. Place a metal cooking pot onto the cooking zone. The pan recognition
device will activate the induction coil.
As long as no metal cooking pot is placed onto the cooking zone, the
display will alternate between the power level set and the symbol
no pot is placed on the cooking zone it will switch off after 10 minutes for
reasons of safety. Please refer to the Section on "pan recognition".
Switching off a cooking zone
4. a) Press the minus button
display shows 0, or
b) Press the minus button
time. The cooking zone is switched off direct irrespective of the power
setting or
c) Press the on/off button
the cooking zones are switched off).
Switching off the hob
5. Press the on/off button
irrespective of any settings.
STOP function
The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.
1. Pots and pans are on the cooking zones and the required power levels
have been set.
2. Press the STOP button
another instead of the cooking levels previously selected.
3. The interruption is ended by firstly pressing the STOP button
then pressing any other button (except the on/off button).
The second button must be pressed within 10 seconds as the hob will
otherwise be switched off.
until the power setting displays indicate 0. A
or the minus button
several times until the power setting
and the plus button
. The entire hob will be switched off (all of
. The hob will be completely switched off,
. The letters S-T-O-P will be shown one after
GB
to select a
. If
once at the same
and
23
Advertisement
Table of Contents
