D-Link DAP-2695 Command Line Interface Reference Manual page 4

802.11 b/g /n Access Point Command Line Interface Manual
Type "admin" for the D-Link Access Point login username in the screen above and press Enter. The following screen opens:
There is no initial password. So go on for the next.
The screen above indicates you have successfully logged into the DAP-2695.
Commands are entered at the command prompt, WAP->
There are a number of helpful features included in the CLI. Entering the "?" command and then pressing Enter will display a list of all of the top-level commands.
The same information can also be displayed by entering "help".
4