The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the
CLI and available through the console interface uses the same syntax.
Purpose
Syntax
Description
Example Command
Purpose
802.11 b/g /n Access Point Command Line Interface Manual
Note: All commands are case-insensitive.
<angle brackets>
Encloses a variable or value that must be specified.
set ssid <ssidname>
In the above syntax example, you must specify the
ssidname. Do not type the angle brackets.
set ssid dap2695
[square brackets]
Encloses a required value or set of required arguments.