Set The Mode Switch; Set The Power Switch To On; Check The Indicator Lights - Hypertherm POWERMAX1250 Operator's Manual

OPERATION

Set the mode switch

1

Set the power switch to ON

2

Check the indicator lights

3
AC AC
Check that the remaining indicator lamps are NOT illuminated. See Section 5,
Maintenance and parts , for details.
4-8
1
Use to cut expanded metal.
Automatically reinitiates pilot.
Use to cut plate/sheet metal.
Optimum consumable life.
Use to gouge, or for non-transfered-arc operation.
Position the power switch to ON ( I ) as shown.
Check that the POWER ON lamp is illuminated.
Check that the gas pressure LED is illuminated in green.
V
powermax
1250
Operator Manual