Leveling; Heater Contactor Wires (Ht Only) - Jackson DishStar HT Installation, Operation And Service Manual

INSTRUCTIONS
INSTALLATION

LEVELING

The dishmachine is designed to operate while level. This is important to prevent any
damage to the machine during operation and to ensure the best possible results. The
unit comes equipped with adjustable bullet feet which can be turned using a pair of
pliers. Since this machine is an undercounter unit, it should be levelled as close as
possible to the unit's location before it is pushed under the counter.
HEATER CONTACTOR
1. Flip the "ON/OFF" switch to "ON."
WIRES (HT ONLY)
!
CAUTION
2. Listen for the water to stop filling.
Heater contactor wires
must NOT be connected
before water fills the unit
the first time!
3. Flip the "ON/OFF" switch to "OFF."
4. Listen for the water to stop draining.
5. Flip the "ON/OFF" switch back to "ON."
6. Listen for the water to stop filling.
7. Flip the "ON/OFF" switch back to "OFF."
8. Listen for the water to stop draining.
9. Flip the "ON/OFF" switch back to "ON."
10. Listen for the water to stop filling. This time the water should begin to splash
into the cavity of the machine.
11. Once you hear water splashing, flip the "ON/OFF" switch back to "OFF."
12. Listen for the water to stop draining.
11
07610-004-37-13-E