Table of Contents
Advertisement
Available languages
Available languages
Quick Installation Guide – MicroFlex e150
About this guide
This guide contains very basic information about the mechanical and electrical
installation of the MicroFlex e150.
Applicability
Applies to all models of MicroFlex e150, part numbers beginning E152A...
Related documents
For a list of related documents in English, see the inside of the front cover.
Safety instructions
WARNING! All electrical installation and maintenance work on the drive should
be carried out by qualified electricians only.
Never work on the drive, the braking chopper circuit, the motor cable or the motor
when input power is applied to the drive. After disconnecting the input power, always
wait for 5 minutes to let the intermediate circuit capacitors discharge. Always ensure
by measuring that no voltage is actually present.
A rotating permanent magnet motor can generate a dangerous voltage. Lock the
motor shaft mechanically before connecting a permanent magnet motor to the drive,
and before doing any work on a drive system connected to a permanent magnet
motor.
Quick Installation Guide – MicroFlex e150 3
Advertisement
Table of Contents
