Table of Contents
Advertisement
Making a Second Call
Dialling Another Number
Notice
Hot Key
Pressõ, and dial the other number.
1 During a call, press ô Menu .
2 Using [ select SECOND CALL .
3 Enter the desired number using the numeric keypad.
4 Press ô Call .
1: Ending a Call
Notice
Hot Key
Press õ and 1, to end the call and to activate
the call on hold.
Getting Outside Line
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an outside line
access code in order to get a connection to the public tele-
phone network (PSTN) from a PABX.
Inserting Outside Line Access Code
Enter the outside line access code with which you reach the
public telephone network before you enter the desired
number or select a stored entry. The outside line access
code is usually 0.
Incorrect Outside Line Access Code
Notice
Incorrect Outside Line Access Code
In rare cases, the outside line access code may be
a different number or a two-digit number. For
older telephone systems, the outside line access
code can be R (= Flash). Press R to enter this
outside line access code. If the connection to the
public telephone network is not possible, con-
tact your telephone system supplier.
Setting Up an Extension
Notice
Connection to Private Automatic
Branch Exchange
If you operate your device permanently at an
extension, store the outside line access code with
the 96 function (see page 40).
Hands-free
Low Battery Charge
Notice
Low Battery Charge
This function is not available if the battery
charge of the cordless telephone is low. Place the
cordless telephone into the charging station.
Switching On Hands-free
1 During a call, press ô Menu .
2 Using [ select Deact. .
3 Confirm with OK.
Telephone Functions · Getting Outside Line
Switching Off Hands-free
1 Select Deact. again.
2 Press ô Deact. .
Switching Hands-Free On/Off
Notice
Switching Hands-Free On/Off
You can switch the hands-free mode on and off
by pressing " key during a telephone call.
Forwarding a call
Function Only Available with Several Cordless Telephones Registered to the device
Forwarding a Call to Dect
Notice
Function Only Available with Several
Cordless Telephones Registered to the
device
This function is available only if you have regis-
tered several cordless telephones with your
device and the telephones are within the range of
the device.
1 During a call, press ô Menu .
2 Using [ select CALL TRANSFER .
3 Confirm with OK.
4 Select the cordless telephone to which you would like
to transfer the call using [.
5 Confirm with OK.
6 Press ', to hang up.
Getting Back the Telephone Call
You can get a transmitted telephone call back, before the
cordless telephone is picked up.
1 Press ô Menu .
2 Using [ select HANGING UP .
3 Confirm with OK.
Placing internal calls
Intercom Dect
Function Only Available with Several Cordless Telephones Registered to the device
Notice
Function Only Available with Several
Cordless Telephones Registered to the
device
This function is available only if you have regis-
tered several cordless telephones with your
device and the telephones are within the range of
the device.
1 In the starting mode, press {.
2 Using [ dial the cordless telephone you would like to
call.
3 Press ô Call .
EN
15
Advertisement
Table of Contents
