Creating The Oss Voltage Server - Sony KV-DZ29M30 Service Manual

++ Anytime you update the DPACL and DPCONF files you must do the
following to load your new configuration:
XDP_COMPILE
XDP_LOAD_CONFIG
**** PLEASE READ THE SOFTDOC AS PART OF THE INSTALLATION PROCESS
**** PLEASE READ ALL OF THE ABOVE CAREFULLY TO MAKE SURE YOU HAVE ****
**** NO PROBLEMS INSTALLING THIS NEW RELEASE
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
Do you want to continue the install <N>?y
Which volume do you want XYGATEDP installed on <$DATAA>?$SYSTEM
Which subvolume do you want XYGATEDP installed on <XYGATEDP>?
What do you want to name the macro to run XYGATEDP (maxlen 3) <XDP>?
What do you want to name the XDP HELP macro <XDPHELP>?
You will need to know the location of your existing VOLTAGE library.
Search for the LIBVPHOS file on your system.
VOLTAGE library is usually located.
Existing VOLTAGE Library location (vol.subvol)? $SYSTEM.VOLTSDK
What do you want to call the XYGATE audit file <AUDIT>?
Do you want XYGATEDP to audit to EMS <N>?
Spool Collector <$S>?
Company Name <XYPRO Technology Corporation>?
What is the name of the TCP/IP process <$ZTC2>?
VOLTAGE library location
XYGATEDP volume
1.2.2

Creating the OSS Voltage Server

After installing XDP, create the OSS Voltage server by running the LINKNPD macro
provided in the XDP subvolume. The LINKNPD macro will prompt you for the location
of the XYGATEDP installation and the location of the OSS directory containing the
Voltage libraries.
If the SecureData Simple API was installed to the suggested OSS location
/usr/local/voltage, then the Voltage library location for LINKNPD would be
/usr/local/voltage/lib. The OSS directory name is typecase sensitive. If the
macro created the OSS Voltage server successfully, then it will display the object
filename as shown below.
XYPRO Technology Corporation
®
XYGATE Data Protection
Chapter 1. Installing XDP
: $$SYSTEM.VOLTLIB
: $SYSTEM
™
Reference Manual
That is where the
4
****
****
Proprietary and Confidential