Ricoh D177 Service Training page 89


After the first sheet is fed and shift operation is completed, the paper output rollers
move to the strong pressure position.

After the trailing edge passes the paper output roller, that roller reverses to send the
paper to the stacking area.

At this time, the junction gate [J] moves up (shown as the blue arrow and circle) to
send the paper to the stacking area.

Paper is fed to the stacking area by the reverse roller [H].

When paper is fed to the reverse roller, the paper output rollers move to the pressure
release position (shown as the red arrow), so that the shift operation can be
performed for the next sheet.
Slide 89
No additional notes
Stapling
Stacking in the Stapler Tray - 2
89
Met-C1yz Training