This is a transfer roller that allows full bleed printing on
315mm width paper.
The standard transfer roller allows image widths of up to
Do not touch the surface of this roller during installation.
The material is very soft and breaks easily.
Before you change the roller, you need to set SP2-400-001
to 1.
Real time process control is disabled if the extension unit is
Then turn the power off.
Install the new roller.
Slide 34
No additional notes
Options
Imageable Area Extension Unit - 1
305 mm.
installed. This is because real time process control uses
areas at the extreme edges of the ITB, which are outside
the image area if the normal PTR is used, but not if the
extension unit is installed.
34
Met-C1yz Training