Ricoh D177 Service Training page 35

 When you forget to change the SP, the following problems
occur.
 If the SP setting is the normal setting (SRA3 paper not
 If the SP setting is for SRA3, but the paper transfer roller is
Slide 35
No additional notes
Options
Imageable Area Extension Unit - 2
supported), but the optional longer paper transfer roller is
installed
» Images at the edges of SRA3 paper will not be transferred.
» MUSIC/program control pattern adheres to the ends of the
paper transfer roller (outside the A3 area), and this can
transfer to the underside of printouts.
» Real-time process control cannot be performed correctly, and
because of this, an abnormal image and SC285-00 (MUSIC
error) may occur.
the normal one (SRA3 paper not supported)
» Images at the edges of SRA3 paper will not be transferred.
– Real-time process control is not performed, and the time
between process controls will be shorter (productivity will
decrease)
» The waiting time for fusing temperature rise is longer than
intended.
35
Met-C1yz Training