Ricoh D177 Service Training page 52


How to determine the correct type to install?

There are three labels on the rear of the operation panel. The center label [A] shows
the LCD model number.

The first letter is either an S or a C or an A, to indicate the different vendors.

Panels from vendor S and vendor A are interchangeable.

If your machine has a label starting with S, you can replace the LCD with another one
that has a label starting with S or A.

If your machine has a label starting with A, you can replace the LCD with another one
that has a label starting with S or A.

If your machine has a label starting with C, you can only replace the LCD with
another one that has a label starting with C.
Slide 52
 See the above section of the service manual for more details on replacing the
two types of LCD panel.
LCD Panels - 2
Replacement and Adjustment > Controller Unit > LCD
52
Met-C1yz Training