Ricoh D177 Service Training page 37

 Before installation, do the following SP adjustments.
 Set SP5-748-201 bit 0 to 1 (default: 0).
 Set SP5-748-101 to 1 (default: 0).
 After installation, do the following SP adjustments.
 Set SP5-752-001 bit 0 to 1
 Set Scanner SP1-041-001 bit 0 to 1
 If the fax option is installed, set Fax SP3-301-001 bit 0 to 1
 Switch power OFF/ON.
 After switching the power on, if the default setting icon is
displayed and the default screen is displayed, the
operation panel is connected normally.
Slide 37
No additional notes
Options
Smart Operation Panel
37
Met-C1yz Training