Pressure
Release Filter
TD Sensor
A two-component development system is used.
One motor drives the K development motors, and another motor
drives the three color development units.
The TD sensor is a non-contact type, containing an ID chip.
Development bias is applied via a plate spring on the rear cover
of the PCDU.
The pressure release filter is larger than the one in the Ap/At-C3
series.
Slide 60
In the ID chip, the following data is stored.
Model series ID
New PCDU information
Color information
Developer replacement information
PCU replacement information
Sensor serial no., date of manufacture
Date of unit installation
Unit total counter at installation (no. of sheets, travel distance)
Date of unit operation
Unit total counter during operation (no. of sheets, travel distance)
Unit parts information
Total counter
Total color counter
Development
60
Met-C1yz Training
Development
Roller